One of the immediate
problems with mounting your equipment in a rack or enclosure is that of
proper ventilation. With these Rack Mount Fan Panels, your equipment
will stay cool and last longer. The panels come in one or two fan
configurations. Each fan comes with a 4 foot 120 volt AC cord for
plugging into a terminal strip or for operation only during operation,
plug it into the switched AC outlet on an amplifier or computer or an
intelligent power center.
The fans can be configured by the end user to
work in an "intake mode" or an "exhaust mode." For maximum cooling,
place one at the bottom of your rack in the intake mode and one at the
top in the exhaust mode. For less demanding applications, use one unit
at the top or bottom with a vented grill panel at the opposite end.
Don`t worry about the fans causing too much noise. The single fan panel
is rated for 30dBa while the duel model is a whisper quiet 33dBa. Each
panel occupies 3 rack spaces and each assembly comes complete with fans
and grilles attached to the panel plate. The single fan panel contains
the anodized finish, similar to brushed aluminum. The 2-Fan unit has a
powered texture coating.
| Specifications: |
Each Fan |
| Airflow: |
71CFM |
| Noise: |
30 dBA |
| Impeller: |
UL94V-O Reinforced Plastic |
| Venturi: |
Aluminum Alloy |
| Electrical: |
120 volts, 50/60 Hz, 7-watts |
| Electrical Certifications: |
UL3266, CSA CL 1252 |
| Motor: |
Shaded Pole Induction Motor |
| Dimensions: |
5-1/4" x 19" x 2" |
|